st 32

Spray November 2013

Personal Care Formulary, Continued Superior Shield Hair Spray Conditioner From preceding page Dow Corning 193 Surfactant4 /(Dimethicone Copolyol)......3.00 Escalol 5775 /(Benzophenone-4)...........................................0.40 Fragrance Light & Clean6 /(Fragrance).................................0.50 Glycosphere L-20 Polysorbate 20 Lonza Personal Care ........1.00 Isopropanol /(Isopropyl Alcohol)..........................................2.00 LaraCare™ A2002 /(Galactoarabinan)..................................2.00 Suppliers: 1 Manufactured by Finnfeeds and distributed by Lonza Personal Care. 2Lonza Personal Care 3BASF 4Dow Corning 5Ashland 6J&E Sozio Inc. Procedure: 1. Weigh out the water. Begin heating to 50°C. Add Panthenol and Betafin BP-20 mix until dissolved. 2. Pre-blend Benzophenone-4 and Propylene Glycol. Heat to 50°C. Mix until dissolved and add to the batch. Begin cooling. 3. Add Honeyquat 50 PF and Dehyquart A. At 40°C add NAB Fennel Seed Extract and Mikrokill COS. 5. Pre-blend fragrance and Polysorbate 20. Add to the batch. 6. Add Isopropanol and Laracare A200. Physical Properties: Appearance: Clear, Pale Yellow Liquid pH: 3.5 - 4.0 Viscosity: N/A Source: Lonza Personal care Revitalizing Hair Serum Trade Name/INCI Designation.......................................... %w/w Part A Water...................................................................................92.45 Glycerin.................................................................................2.00 Natrosol 250 HHR CS1 /(Hydroxyethylcellulose).................0.50 TRIquat Force2 /(Polyquaternium-4)....................................1.50 DL Panthenol FCC/USP2 /(Panthenol).................................0.50 Versene Na2 Crystals3 (Disodium EDTA).............................0.05 Part B TRIstat E2 /(Benzyl Alcohol, Water, Potassium Sorbate, Sodium Benzoate)................................................1.00 Fision Hair2 /(Water, Hydrolyzed Rice Protein, Panthenol, Panthenyl Hydroxypropyl Steardimonium Chloride, Butylene Glycol, Arctium Lappa Root Extract, Hedera Helix Ivy Extract, Trigonella Foenum- Graecum Seed Extract).......................................2.00 Suppliers: 1Ashland Inc. 2 Tri-K Industries Inc. 3The Dow chemical Co. Procedure: Add Hydroxyethylcellulose to Part A and mix until fully hydrated. Add remaining Part A ingredients individually in the given order. Ensure uniformity before each addition. Add Part B ingredients individually. Mix until uniform. Source: Tri-K Industries, Inc. Simply Soft Hair Detangling Spray with REJUVASOFT (HP-344) Description: REJUVASOFT and ARLASILK PLN combine to simply deliver a range of aesthetic benefits unattainable from far more complex commercial products. In this premium detangler, REJUVASOFT makes the hair look and feel healthy and moisturized through its unique combination of aesthetically elegant conditioners, emollients and fatty alcohols. The ARLASILK PLN further contributes to the performance package by delivering silicone’s shine and conditioning via an easy-to-use water soluble form. After shampooing, spray the “Simply Soft Detangling Spray” on towel-dried wet hair. Comb through the hair to gently remove the tangles. Do not rinse out. Trade Name/INCI Designation.......................................... %w/w Part A Deionized Water..................................................................96.50 ARLASILK PLN1 /(Linoleamidopropyl PG-Dimonium Chloride Phosphate Dimethicone)............0.50 REJUVASOFT1 /(Quaternium-91 and Behentrimonium Chloride and Myristyl Myristate and Cetearyl Alcohol Proposed)..................................2.00 Methylisothiazolinone and Caprylyl Glycol2......................0.80 Fragrance3..............................................................................0.20 Suppliers: 1Croda 2 Neolone CapG, Rohm and Haas 3Be Delicious (106X11), Flavor & Fragrance Specialties Procedure: The procedure for this premium detangler is a simple one pot process. Charge the mixing vessel with water, add the ARLASILK PLN, and begin mixing. Add the solid REJUVASOFT to the water and begin heating to 75°C while continuing to mix. The REJUVASOFT will begin to melt as the system heats. Once the system reaches 75°C, maintain temperature for 15 minutes, while continuing to mix. Remove heat, and allow to cool while mixing well throughout the cool down process. At 40°C, add fragrance and preservative and mix. Finish by packaging into a spray bottle. Physical Properties: pH: 5.0 ± 0.5 Viscosity: 750 cps ± 10% (RVT Spindle 4 @ 10 RPM, 25°C) Source: Croda 32 Spray November 2013


Spray November 2013
To see the actual publication please follow the link above