st 28

SprayFeb14

Personal Care Formulary Ultra Blow Dry Conditioning Spray (12365-25) Trade Name/INCI Designation.......................................... %w/w Part A Water ..................................................................................60.25 Versene 1001/ (Tetrasodium EDTA)......................................0.10 UltraThix P-100 polymer2 /(VP/AA Crosspolymer).............0.60 Sodium Hydroxide (10% solution)........................................0.60 Part B Water...................................................................................21.50 Gafquat 755N polymer2 /(Polyquaternium-1).......................5.00 Sodium Hydroxide (10% solution)........................................0.60 Part C Water.....................................................................................9.00 Belsil AME 60573 /(Amodimethicone and Cetrimonium Chlorideand Trideceth-10 .................................................1.00 Carsoquat CT-4294 /(Cetrimonium Chloride)......................0.35 Optiphen4 (preservative) /(Phenoxyethanol and Caprylyl Glycol.....................................................................................1.00 Total.......................................................................... 100.00 Suppliers: 1 Dow 2 Ashland 3 Wacker 4 Lonza Appearance: Milky Viscous Liquid pH: 6.5 +/- 0.20 Packaging: Equipment: Precision Valve Valve: Stem 0.61mm, housing with slots Actuator: Magic mousse Source: Ashland Natural Look Enhancing Pump Hair Spray S-X0062(AP) Description: Fixate G-100 Polymer imparts natural hold to this clear nonaerosol pump hair spray. A non-greasy wax-like sensory is imparted by Hydramol PGPL Ester. Glucam P-20 Humectant improves the fragrance retention, and Chemonic OE-20 Emulsifier solubilizes the fragrance. Trade Name/INCI Designation.......................................... %w/w 28 Spray February 2014 Part A Chemonic OE-20 Ethoxylated Alcohol1 /(Oleth-20)............ 1.00 Glucam P-20 Humectant1/(PPG-20 Methyl Glucose Ether)......4.00 Hydramol PGPL Ester1/(PEG/PPG-8/3 Laurate).................. 3.00 Part B Fragrance HGD 035A2/(Fragrance)......................................0.30 Ethanol (99.5%)/ (Alcohol)................................................15.00 Deionized Water..................................................................69.30 Fixate G-100 Polymer (26 %TS) 1/(AMP-Acrylates/Allyl Methacrylate Copolymer)......................................................7.00 Glydant Plus Liquid3 /(DMDM Hydantoin and Iodopropynyl Butylcarbamate)....................................................................0.40 Suppliers: 1 Lubrizol Advanced Materials 2Givaudan 3Lonza (Distributed by Sunpu Biochem) Procedure: Part A: In a suitable vessel, mix Part A ingredients. Add Fragrance to batch. Mix until uniform. Add Alcohol to batch slowly. Mix until uniform. Add Deionized Water to batch slowly. Mix until uniform. Add ingredients 7 & 8 to batch in order with mixing. Mix until uniform. Properties: Appearance: Clear liquid pH: 6.5 – 7.5 Viscosity (mPa·s): < 100 (Viscosity is too low to be measured with DVII+ Brookfield DVII, spindle #1) Turbidity (NTU): 3 – 8 (HF Scientific, Inc. Micro 100 Turbidimeter) Stability: Passed 3 months @ 45°C, Passed 3 freeze/thaw cycles Packaging: Seaquist (Aptar) spray pump with bottle Comments: 1. Due to the alcohol in this formulation, follow safety precautions appropriate for the handling of flammable liquids. 2. Due to the alcohol in this formulation, it is recommended that customers review the environmental and regulatory requirements of the states and countries where they wish to market this type of product to be sure that they are in compliance with local VOC regulations. Source: Lubrizol


SprayFeb14
To see the actual publication please follow the link above